TZRS-EPDM150 (2X)
EPDM Rubber Heat Shrink Tubing
Description
Volsun TZRS-EPDM150(2X) is a a new type of heat shrink tubing product, which is made through complicated formulation of EPDM rubber and special resins. When TZRS-EPDM150(2X) is heated, its inside diameter quickly recovers to half of the expanded inside diameter as supplied to tightly wrap and cover the electronic components inside. Compared to normal EPDM tubing, TZRS-EPDM150(2X), cross linked through the irradiation of electronic accelerators, has much better physical and mechanical performance, higher dielectric strength, abrasion and wear resistance. It finds wide applications in electronics, automotive, and consumer goods markets for jacketing and protection to cables, pipes, and connectors etc and protecting solder joints, wires, cables, terminals, connectors and various electronic apparatus.
Features
Environmental friendly
Outstanding low and high-temperature performance
Flexible & good hand feeling
Higher shrink ratio than heat shrinkable silicone tubes
Excellent acids and alkalis resistance
Chemical solvent resistance
Ultraviolet light and weather aging resistance
Good ozone resistance
Minimum shrink temperature: 100 degrees celcius
Minimum full recovery temperature: 135 degrees celcius
Continuous operating Temperature Range: -55 degrees celcius~150 degrees celcius
Shrink Ratio: 2: 1
Use in 180-200 degrees celcius
Standard color: Black
Technical Data
Dimensions
EPDM Rubber Heat Shrink Tubing
Description
Volsun TZRS-EPDM150(2X) is a a new type of heat shrink tubing product, which is made through complicated formulation of EPDM rubber and special resins. When TZRS-EPDM150(2X) is heated, its inside diameter quickly recovers to half of the expanded inside diameter as supplied to tightly wrap and cover the electronic components inside. Compared to normal EPDM tubing, TZRS-EPDM150(2X), cross linked through the irradiation of electronic accelerators, has much better physical and mechanical performance, higher dielectric strength, abrasion and wear resistance. It finds wide applications in electronics, automotive, and consumer goods markets for jacketing and protection to cables, pipes, and connectors etc and protecting solder joints, wires, cables, terminals, connectors and various electronic apparatus.
Features
Environmental friendly
Outstanding low and high-temperature performance
Flexible & good hand feeling
Higher shrink ratio than heat shrinkable silicone tubes
Excellent acids and alkalis resistance
Chemical solvent resistance
Ultraviolet light and weather aging resistance
Good ozone resistance
Minimum shrink temperature: 100 degrees celcius
Minimum full recovery temperature: 135 degrees celcius
Continuous operating Temperature Range: -55 degrees celcius~150 degrees celcius
Shrink Ratio: 2: 1
Use in 180-200 degrees celcius
Standard color: Black
Technical Data
| Properties | Typical Data | Test Method |
| Density(g/cm³) | 1.1±0.05 | ASTM D 792 |
| Tensile Strength(Mpa) | 14(Min.) | GB/T 528 |
| Ultimate Elongation(%) | 400(Min.) | GB/T 528 |
| Tear Strength(KN/mm) | 60(Min.) | ASTM D 624 |
| Dielectric Strength(KV/mm) | 12(Min.) | ASTM D149 |
| Volume Resistivity(Ω.cm) | 2×1013(Min.) | ASTM D 257 |
Dimensions
| Size (mm) | As Supplied(mm) | After Full Recovery(mm) | Scope of Application (mm) | Standard Package (m/spool) | |
| I.D. (Min.) | I.D.(Max.) | Wall Thickness | |||
| Φ6 | 6.5 | 3 | 0.8±0.10 | 3.5-6 | 50 |
| Φ8 | 8.5 | 4 | 0.9±0.10 | 4.5-8 | 50 |
| Φ10 | 10 | 5 | 1.2±0.10 | 5.5-9.5 | 50 |
| Φ12 | 12 | 6 | 1.2±0.10 | 6.5-11.5 | 20 |
| Φ16 | 16 | 8 | 1.5±0.15 | 8-15 | 20 |
| Φ20 | 20 | 10 | 1.5±0.15 | 11-19 | 20 |
| Φ30 | 30 | 15 | 1.8±0.15 | 17-29 | 20 |
| Φ40 | 40 | 20 | 2.0±0.15 | 22-38 | 20 |
| Φ50 | 50 | 25 | 2.0±0.20 | 27-48 | 10 |
| Φ60 | 60 | 30 | 2.0±0.30 | 32-58 | 10 |
| Φ70 | 70 | 35 | 2.0±0.30 | 38-68 | 10 |